Were not the DAP slides color coded to signify gas or alky ? Red for gas, blue alky, or vice versa ? ...   Sun May 12th, 2019 05:41 am

The ZAMA wasn't really a Tillotson knock off, and not ever heard anything bad about them. But there are full knock-offs coming out of china that ...   Mon Apr 22nd, 2019 08:14 am

Did anyone like Wiseco make a forged piston for the 101 to use the SP125 rod, that had the boost port opening ? All I've came ...   Mon Apr 22nd, 2019 08:08 am

They are out there, but maybe not in a 14mm pin size. Look at some of the dirt bike people like Denis Kirk. They consist of a ...   Mon Apr 22nd, 2019 07:55 am

Kelly, I have 2 Hewland gear boxes, one used, one new, with an unused side cover, and one used rotary valve cover. Side cover has cast in ...   Fri Apr 12th, 2019 09:16 pm

I have a pair, decent shape, with a lot of hard to find parts. No broken fins, have headers, and genuine Mugen pipes, and Walbro carbs, ...   Wed Jan 23rd, 2019 12:58 am

The Hill Country Kart Club in New Braunfels, TX (just nort of San Antonio) has a 'run what you have' class that allows the old ...   Wed Jan 23rd, 2019 12:38 am

FHS stands for "For High Speed'. Pretty sure they started off in the model air plane fuel business. http://fhsoils.com/product/kart-racing-oil/ ...   Wed May 2nd, 2018 09:42 pm

I only use FHS 62R in my West Bends, and Macs. Has the film strength of castor, without the gum & carbon build up. I run 24:1 ...   Mon Apr 30th, 2018 08:46 pm

There is also a Big-J rod. I found mine on eBay. :) ...   Thu Apr 26th, 2018 02:10 pm

...   Thu Apr 26th, 2018 04:22 am

Nothing there... ...   Mon Apr 23rd, 2018 07:07 pm

Margay still ha some parts for these chassis. I was able to buy new nerf bars for mine. ...   Tue Apr 3rd, 2018 07:01 pm

Turns over. 50.37 bore. Header & Motoplat include. No carb. Probably runnable as is, but as kart engines go, I would recommend going through it. $250 + shipping ...   Sat Mar 31st, 2018 02:54 pm

I have a pair of Mugen reed engines, but are more of a mid-80s engines. ...   Fri Mar 23rd, 2018 05:25 pm

I'll have to open some boxes, and take inventory. (arg) ...   Fri Mar 9th, 2018 01:43 pm

Let me know what you decide. I have a bunch also, and kart books. Would like to move them so I can buy more :) ...   Thu Mar 8th, 2018 08:40 pm

Hm, I didn't know the Panther-X came with an aluminum tank. Was it an option? Have pictures? ...   Mon Mar 5th, 2018 03:09 am

Hm, wonder if they offer chroming ? ...   Fri Mar 2nd, 2018 08:51 pm

Barry, did you try calling Margay? I called them about parts for my Panther-X, and they had them. ...   Thu Mar 1st, 2018 06:34 am

Never seen that one before, but doable. I did a Jacobson piston port conversion back in the '60s. ...   Wed Feb 28th, 2018 11:01 pm

I have Wiseco 56, and 56.5 top Dykes rings. ...   Sat Feb 24th, 2018 09:03 pm

If you find one, I have 2 new Wiseco pistons with rings. Sold my K30, so no need for them any longer. ...   Thu Feb 22nd, 2018 06:43 pm