Thanks Tom ...   Sun Jan 24th, 2021 11:43 am

I used the only one I've had is in an 820 but it should work OK in a 610. I have a Russel stroked crank ...   Thu Jan 21st, 2021 03:01 pm

Dan, The 610 and 820 crankshafts were made the same without welded on counterweights. I think the counterweights were added for the Earl Larsen 820 class. ...   Thu Jan 21st, 2021 12:35 pm

Thanks for looking, I found one ...   Fri Nov 20th, 2020 12:56 pm

Looking for a fuel cap similar to this one Dick Teal ...   Thu Nov 19th, 2020 06:54 pm

Tom, Jack Murray had some of these and they will work but they have a groove machined in the shank, are too long and do not ...   Tue Nov 10th, 2020 05:42 pm

What do you need for the ball joints you still have, if you're willing to sell them? I reproduce stainless Fox pedals and throttle arms ...   Sat Nov 7th, 2020 09:38 pm

If you still have them I am interested in buying. They would work great on my current restoration. Thanks again, Dick Teal 1-920-296-5786 ...   Sat Nov 7th, 2020 07:23 pm

This is the 1967 literature. ...   Sat Nov 7th, 2020 02:23 pm

Dan, Interesting question. My original drawings of the 59 Mak-Kart assembly shows the version in my post. The parts list shows it as 200-017 and I ...   Sat Nov 7th, 2020 02:21 pm

Looking to buy or trade for Fox adjustable ball joints. teal@charter.net 1-920-296-5786 ...   Thu Nov 5th, 2020 01:20 pm

Stan, I found a pair of the Hands wheels. Dick ...   Thu Sep 10th, 2020 03:59 pm

Looking to buy a pair of 4 inch Hands front wheels. Dick Teal teal@charter.net Thanks for looking, I found a pair. ...   Wed Sep 9th, 2020 01:47 pm

Joe, You bought them from me a while back. I still have a few sets left that are not polished. $55 a set plus $8 for ...   Sun Aug 9th, 2020 04:01 pm

Here's the super series info also ...   Thu Jul 2nd, 2020 01:18 pm

Try the Ocala, FL track, they were/are a Tony Kart dealer. ...   Thu Jun 25th, 2020 05:39 pm

Here's what I have, It's a pdf file with what you want ...   Thu Jun 25th, 2020 02:40 pm

Terry Ives makes a generic one that will work ...   Sat Apr 25th, 2020 01:01 pm

The kart track and shop in Ocala, FL is a Tony kart dealer ...   Fri Apr 10th, 2020 04:22 pm

Call me and I will give you Joel's phone number. He has my old fixture and a tube bender. Dick Teal 920-296-5786 (cell) ...   Mon Nov 25th, 2019 01:43 pm

I've used US Chrome that Kurt talked about for at least 24+ 820 blocks. I have them hone the bore to 2.531 ID and they ...   Sun Mar 24th, 2019 12:42 am

Great pictures Dan ...   Mon Oct 2nd, 2017 05:32 pm