Please register to gain full access of the forum.
When you register please use your given name.handles and fake names will be deleted. if you are deleted you can re-register with your real name.
Horstman Rev-Grip dry clutches were a thing back in the 70s and 80s.
I just sold an outboard spider hub to Bob Alexander. Bob, please post the photo you sent me. I can't transfer it from my phone.
The hub has a McCulloch taper and uses a half moon key to lock it to the crankshaft.
The center of the hub (hub on right in photo) is larger diameter than the center of the hub on the left (assembled hub). We can't identify what the hub on the right is used for, say maybe a drum with 15T or 16T?
I emailed Horstman Clutches about 30 minutes ago. Maybe they can ID it in a couple days. In the meantime, can anyone help ID this clutch spider hub?
That hub is used on the oil bath version of the clutch. The bearing in the aluminum cover rides on the OD of the side that does not have the snap ring groove. The nut that holds the hub on the crank goes inside the boss.
Steve O'Hara