View single post by S Kneisel
 Posted: Fri Feb 15th, 2019 10:10 pm
PMQuoteReplyFull Topic
S Kneisel

 

Joined: Thu May 25th, 2017
Location:  
Posts: 58
Status: 
Offline
Mana: 
 I have used a few different types. They are built on the metric platform so most of the parts are not interchangeable. but the diaphragms are the same as well as the fuel inlet.
They do work pretty well, not quite like the real thing but decent. I found that I had to bore the HS mixture hole to about 0.062" to get them to work , otherwise they run pretty lean. The LS circuit is fine the way it is.I also plug the choke shaft holes.
They are actually a replacement for a Stihl 08 08S BT360 chainsaw.
Ebay has them, here is a link:https://www.ebay.com/itm/Carburetor-For-Stihl-08-08S-BT360-TILLOTSON-HL-166C-ZAMALA-58-Chainsaw-Carb-US/173609249454?hash=item286beaeaae:g:uUIAAOSw61Fb0y-Q:rk:14:pf:0
Close Window