Looking to buy (or trade) a 9 or 10 tooth clutch drum for a WB 820 stepped crank. I have a 12 tooth (w/roller bearing) ...   Wed Dec 21st, 2022 11:26 pm

I'm in need of the crankshaft eccentric that opens the points.    This is for a CLOCKWISE rotation PTO/COUNTER CLOCKWISE flywheel. ALSO, a complete WICO brand ignition......coil, ...   Tue Nov 15th, 2022 12:31 am

Someone from here sent me a PM last week looking for a 610 piston.....put him off so I could locate it.  I did find it.   ...   Wed Oct 26th, 2022 12:48 am

Like it says in the subject......focus on CHEAP!!!!!! ...   Sat Oct 8th, 2022 01:20 am

SOLD......10/07.   THANKS. ...   Sat Oct 8th, 2022 01:09 am

In my continuing clean up, I've located 2 sets of original Rupp spindles.   One set from an A Bone I redid (NICE), and a second ...   Thu Oct 6th, 2022 12:53 am

As of now (9-28 1920 hrs)........The Nylites, the 4" Rupp turbines, the Ives 820 V-12 intakes, and the Bendix brake stuff have all been SOLD....and ...   Thu Sep 29th, 2022 12:26 am

4" Turbine wheels are sold. ...   Mon Sep 26th, 2022 02:45 pm

9/23 NYLITES ARE SOLD....... ...   Sun Sep 25th, 2022 04:16 pm

Momma's car took a dump today....was a bit distracted/busy with that.  I'll FOR SURE, get you pictures tomorrow (Sunday).   Apologies.......     Chuck ...   Sun Sep 25th, 2022 01:41 am

The Nylites from my previous post are SOLD and SHIPPED.    My recent posts for Turbine wheels, V-12 manifolds, and Bendix brake stuff indicate shipping on ...   Thu Sep 22nd, 2022 12:49 am

Like it says.......6" Bendix brake drum.....never mounted.......chrome is 9.5 out of 10.New shoes....don't know if they are NOS or repops.   They are BONDED, not RIVETED.   ...   Thu Sep 22nd, 2022 12:46 am

A pair of Rupp 4" turbines.....inners are nice after walnut shell/low pressure blasting.  Outers cleaned up, some pitting, not worth rechroming, are now rattle can ...   Thu Sep 22nd, 2022 12:41 am

More stuff off the shelves........ 2 Terry Ives repro V-12 manifolds (with reed cages) for an 820.   One was mounted for fit up, the second never ...   Thu Sep 22nd, 2022 12:36 am

Planning on being @ Delmar if that helps you.  Just need to know ahead of time so I can pack the stuff........... ...   Tue Sep 6th, 2022 01:16 am

GEM #1465 mount.   One side is formed for a tube rail, the other is flat.  Center to center is 3.5"    Dirty, nothing broken.    $50? + ...   Tue Sep 6th, 2022 01:13 am

I have SEVERAL pairs of Nylite rims, both fronts and rears.   ALL will need the "hot boil" treatment.   Some are painted flat black, most ...   Tue Sep 6th, 2022 01:08 am

A pair of clean, usable front hubs for Van K rims.   Bearings feel good, NO noise or "catches".     $50 and I'll cover the shipping. ...   Tue Sep 6th, 2022 01:00 am

Several Van K halves available.......3.25, 3.50, 3.75 wide......some with stem holes.  All conditions from "riders" to nice.  ALL total comes to 13 pieces.   $10 ...   Tue Sep 6th, 2022 12:58 am

Wanted to buy......NARROW......1.5 /1.75 wheel halves.   Need 2 of each, stem hole not an issue.   Will buy out right or trade........SEVERAL WIDES from 3.25 to ...   Tue Sep 6th, 2022 12:54 am

Warren.....spent the day reorganizing/searching and I was unable to locate the ones I thought I had. If I run across them I'll let you ...   Thu Mar 17th, 2022 11:31 pm

Bought a bunch of them a while back.....give me a few days to search them out...... Chuck ...   Wed Mar 16th, 2022 01:45 am

At the risk of being "flamed" here's my take.  I have no connection or involvement, and I'm not a shill for Mr. Drabecki (sp).  Your ...   Tue Feb 23rd, 2021 12:26 am

Instruction sheet calls for it as part #86387.  Includes the rivet.  I was told there were 2 versions of this thing......have no idea which one ...   Mon Aug 12th, 2019 01:40 am

Some time in the past 6 months, I sold a bunch of Van K wheel halves, and the buyerwanted the rubbers to run them tubeless.   ...   Mon Aug 12th, 2019 12:42 am