I need the aluminum riser block that bolts to the stuffer end of the west bend 820 block then bolts to the slider mount on ...   Wed Jun 7th, 2023 02:30 am

Jim Donavan at Max Torque clutches ...   Sat Oct 29th, 2022 09:12 pm

Sorry Gerald,I don't have one.Was not my kart. ...   Wed Nov 17th, 2021 06:18 pm

Wanted: Right hand points cam for West Bend 820/610.Please PM me. ...   Tue Mar 16th, 2021 07:38 pm

Restored with new upholstery.Has turbine wheels and 7 Qt tank.Add engine and race.Contact Gene Lang at 309-507-1216 ...   Tue Dec 22nd, 2020 03:47 pm

I have a friend with an A Bone for sale.Restored roller with turbine wheels, 7qt tank. New upholstery when restored.Add engine and race! Call Gene ...   Thu Dec 17th, 2020 10:27 pm

Hi Loren, Welcome to vintage karting! I would suggest starting out with a single engine. There is a good article on vintagekartforum.com for rebuilding ...   Wed Nov 11th, 2020 02:39 pm

Sorry to hear of your heart attack Ron,I've been there. You will be fine,just do what you are supposed to do. That book is a bit ...   Sun Sep 6th, 2020 11:17 am

There is a book available on ebay that tells you pretty much everything ...   Sat Aug 15th, 2020 01:05 pm

...   Sun Jun 7th, 2020 12:32 pm

Good stuff! Have fun! ...   Wed Feb 19th, 2020 11:21 am

That is a Margay pipe. In it's day it was commonly used on Macs and West Bends. Those are hard to find and worth $$$. ...   Tue Feb 18th, 2020 11:26 am

Jeffrey,  First,if you haven't been involved in vintage karting before welcome aboard. Nice find there! You could begin by reading the Mac rebuild article written ...   Sun Feb 2nd, 2020 02:28 pm

Your son would qualify to run in VKA junior class demonstrations. Why not put a McCulloch 49 engine on it. Very dependable. My friend has ...   Tue Jan 7th, 2020 01:04 pm

Hartman clutch puller. Please PM me. Thanks,Tom. ...   Wed Sep 4th, 2019 09:35 pm

Sent you a PM Joe. ...   Tue May 21st, 2019 04:48 pm

I will have Mike Berg repop sets at Springfield. $20 for 25pcs. ...   Thu May 9th, 2019 03:43 pm

Paul, I have used NOS and the the new shoes with Macs and Komets and been able to make them work. I control most of the ...   Fri Mar 22nd, 2019 02:53 pm

I have been using Mikes's rings for years.He makes them in diff sizes. Yes they do get out of round as wear occurs but it ...   Thu Mar 21st, 2019 01:19 pm

Looking for good std Mac flywheels. Buy or will trade 1 good 5 degree for 2 good std. FOUND SOME. Thanks guys. ...   Thu Mar 7th, 2019 07:58 pm

Model 400160D serial # prefix 14. Bore size 2.132 (.007 OS) No grooves or damage to cyl wall or head area.Stock ports. All gasket surfaces ...   Fri Jan 11th, 2019 07:44 pm

2 ring. Please PM me. ...   Thu Jan 10th, 2019 04:38 pm

Brake caliper mtg bracket for Cheetah. Does not have to be Margay just fit 2 hole brg carrier. FOUND ONE! Thanks. ...   Sat Dec 29th, 2018 01:22 pm

Keith, I geared 9-64 on my K78,200# driver. I would think a Yamaha would be similar. ...   Wed Aug 29th, 2018 02:44 pm

I am helping a friend setup a Yamaha Limited and want to buy: 1 or2 SR-Y pipes and L&T race ready 3disc clutches in excellent  ...   Sat Aug 25th, 2018 10:07 pm

I have witnessed what Larry is talking about.In my case it was the coil. ...   Thu Jul 26th, 2018 02:45 pm

Ok, sorry I don't have one of those. ...   Thu May 24th, 2018 12:30 pm

Jerry, what kind are you looking for? I have a nose pc and wing that came with my 75 Emmick when I bought it. ...   Wed May 23rd, 2018 01:25 pm

How much does he want for it? ...   Thu Mar 29th, 2018 01:18 pm

Kudos to Jeff! ...   Fri Mar 9th, 2018 12:47 pm

No Chinese stuff for vintage!! ...   Thu Mar 1st, 2018 10:59 am

Brad,I will add that Terry Ives is a great guy and an expert on Macs. Very helpful too. ...   Tue Feb 13th, 2018 05:18 pm

You can also get parts from Terry Ives. ...   Sun Feb 11th, 2018 02:01 pm

Small Mac flatback rebuilt and drilled for alky by Paul Booth. Bead blasted, lapped gasket surfaces with new pumpers and diaphragm. I intended to use ...   Thu Feb 1st, 2018 03:55 pm

WTB GEM1465 66  and  SDH  S222.  PM please. ...   Sun Jan 28th, 2018 02:43 pm

Most guys are using MCP. you can buy them new, Comet kart sales or Reikens.Not period correct but they work much better and bolt right ...   Thu Jan 18th, 2018 01:22 pm

Margay flat mount for K78 to fit Cheetah. PM please. Hole pattern is 3 1/4 X 5 ...   Sun Jan 7th, 2018 09:31 pm

Wanted to trade: Mac Horstman box muffler in good condition for the same to fit West Bend 820. Please PM me. Thanks. ...   Tue Jan 2nd, 2018 09:43 pm

TEASER! ...   Wed Dec 20th, 2017 02:11 pm

Anyone have a universal angled mount they would sell? I need the one with two 3/8 dia. holes for the flat engine mount plate. 2 ...   Tue Oct 31st, 2017 04:44 pm