I purchased a engine Powwr Bee 820 on E-Bay that had all the bolts loctited in except the manifolds/stuffer . The crank had plates welded on the counter weights. There we a through the rod journal. (See attached picture). The bearings were staked in. My question was this 820 used as a hot saw or what. It had no ordinary mount and the bolts were loctited. Had a devil of time getting them out. Attached is a pictures of the welded crank with a hole through the rod journal. Any answers would be appreciated.
Thanks PatAttachment: IMG_2181.JPG (Downloaded 46 times)
|
