Please register to gain full access of the forum. When you register please use your given name.handles and fake names will be deleted. if you are deleted you can re-register with your real name. |
Moderated by: Kevin Gagne |
Author | Post | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dick Teal
|
Looking to buy or trade for Fox adjustable ball joints. teal@charter.net 1-920-296-5786 Attachment: Ball Joints 003.jpg (Downloaded 70 times) |
|||||||||||
Dan Dettmann
|
Hey Dick, What year Foxes did the pictured ones come from? My '59 and '62 Maks both came with rod ends that were more elongated. I'm wondering if Tourek changed their design (or Fox their spec). |
|||||||||||
Dick Teal
|
Dan, Interesting question. My original drawings of the 59 Mak-Kart assembly shows the version in my post. The parts list shows it as 200-017 and I have the original drawing that was revised in 1969 and it looks like the one I posted. However my 1967 literature shows an extended shank. I can't remember seeing any of the extended ones but that doesn't mean they were never made. Attachment: Ball joint resized 1.png (Downloaded 44 times) |
|||||||||||
Dick Teal
|
This is the 1967 literature. Attachment: File0327 resized 1.jpg (Downloaded 45 times) |
|||||||||||
Dan Dettmann
|
Here's three of the ones that were on our '59 Mak which we bought in '60 and one off my '62 which I bought at the end of the '62 season. Attachment: P1010008.JPG (Downloaded 42 times) |
|||||||||||
Dick Teal
|
If you still have them I am interested in buying. They would work great on my current restoration. Thanks again, Dick Teal 1-920-296-5786 |
|||||||||||
Dan Dettmann
|
I still have the '62 Mak. The '59 is long gone...except for the rod ends. We changed the steering on the '59 back then to ackermann and ended up using heim type rod ends. |
|||||||||||
Dick Teal
|
What do you need for the ball joints you still have, if you're willing to sell them? I reproduce stainless Fox pedals and throttle arms for the cross rod behind the tank if needed. Dick Teal |
|||||||||||
Tom Smith
|
Illston and Rodson Ltd. (Tourek ball joints). Attachment: securedownload.png (Downloaded 22 times) |
|||||||||||
Dick Teal
|
Tom, Jack Murray had some of these and they will work but they have a groove machined in the shank, are too long and do not have a cotter hole. I suppose I could use a filler on the shank and then paint them. I have a fixture for cutting the ball stud and drilling the hole. Thanks for the information. Dick Teal |