View single post by Doug Tenney | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Sat Aug 26th, 2017 10:46 pm |
|
||||||||||||
Doug Tenney
|
There is one thing you should use that welder for: attaching a bracket for a brake master cylinder. You (and your son) will be immeasurably happier with a hydraulic disk brake kit than any band or drum brake.* Given that you're starting from scratch with your rear axle, and you can handle some fabricating & welding, it's a "no-brainer." https://cometkartsales.com/MCP-Rear-Brake-Kit.html When we were getting started, we pored over the photos on the REAR site for how the stuff is supposed to look when it's all put together. http://rearenginekarts.com/ [The annual event is happening next weekend; can you slip away to Fremont Ohio?? You will be "Dad of the year"!] * In the 60's the drum brakes were made by Bendix and they weren't bad; would be fine for your application. However, the scuttlebutt on Azusa's reproductions has not been favorable.
|
||||||||||||
|