View single post by Dick Teal | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Thu Jan 21st, 2021 03:01 pm |
|
||||||||||||
Dick Teal
|
I used the only one I've had is in an 820 but it should work OK in a 610. I have a Russel stroked crank with the weights added and I also built one for a friend of mine. The stock stroke is 1.62 inches and the stroked crank is 1.92 inches. Fantastic torque and power.
|
||||||||||||
|