View single post by Dick Teal
 Posted: Tue Nov 10th, 2020 05:42 pm
PMQuoteReplyFull Topic
Dick Teal

 

Joined: Mon Jul 24th, 2017
Location:  
Posts: 22
Status: 
Offline
Mana: 
 Tom,
Jack Murray had some of these and they will work but they have a groove machined in the shank, are too long and do not have a cotter hole. I suppose I could use a filler on the shank and then paint them. I have a fixture for cutting the ball stud and drilling the hole.

Thanks for the information.

Dick Teal
Close Window