Kelly, Let me know the cost to ship the GEM pipe to 30126. Thanks, Dan ...   Thu Nov 3rd, 2022 11:14 pm

Looking for 1 or 2 right hand thread knockoffs for Rupp Model J or K wheels. Also looking for a right hand thread front hub ...   Tue Mar 9th, 2021 12:48 pm

Thanks Doug, I'll send an email to Bill. Much appreciated. Dan ...   Fri Sep 13th, 2019 11:23 am

Can anyone point me in the right direction to find a tool that will allow me to install the round 1 piece spring on a ...   Thu Sep 12th, 2019 06:58 pm

pm sent ...   Tue May 14th, 2019 02:01 am

Is anyone coming through or close to the Akron, OH area going to or through Atlanta in the next couple months that could pick up ...   Wed Jan 23rd, 2019 02:08 am

Keith,The BM 130 does have more fins than the 100 due in part to the longer stroke. Also a larger bore. I think the 100 ...   Wed Aug 29th, 2018 02:41 pm

Kelly, Does this come with a manifold? Dan ...   Fri Aug 24th, 2018 03:53 pm

pm sent ...   Fri Aug 24th, 2018 03:50 pm

pm sent ...   Fri Apr 6th, 2018 01:43 pm

Thanks Rick, Will do. ...   Wed Jan 3rd, 2018 11:41 am

Thanks Robert, and Merry Christmas to all, except that grumpy looking Santa with the Ho, ho, hum look on his face!:cool: ...   Fri Dec 22nd, 2017 02:30 pm

Looking for some BM 104 parts. Oversize piston, ring, & pin. Gaskets, seals, possibly bearings. BM also made a special nut for the exhaust header ...   Sun Oct 15th, 2017 11:22 am

Anyone out there have a splined rear left hand knock off hub and a splined 1-1/4" rear axle for a Rupp Model K enduro? I'll ...   Mon Oct 9th, 2017 01:21 pm

Thanks for the help. I was able to reach Bill. ...   Mon Oct 9th, 2017 01:14 pm

Does anyone know how to get in touch with Bill Anderson in Augusta, GA Thanks, Dan ...   Tue Oct 3rd, 2017 12:40 pm

Stan, Here's on option. http://www.airheart-brakes.com/karts.html Dan ...   Fri Sep 8th, 2017 12:10 pm

I've been restoring a Rupp Model K Foreign Enduro and had removed the original floorpan with intentions of building a new one when ...   Sun Aug 27th, 2017 08:27 pm

Thanks Chuck ...   Fri Aug 11th, 2017 05:41 pm

Thanks Chuck, I've talked to him a few times since my post and again this morning. Going to visit next week with him.  Unless he's not ...   Fri Aug 11th, 2017 04:12 pm

Thanks Billy, I'll give that a shot. Dan ...   Wed Aug 9th, 2017 12:03 pm

Thanks Doug, I've talked to him in the past to, but not lately. The phone is bizarre. I wondered if it should've been an 803 area ...   Mon Aug 7th, 2017 07:01 pm

I have the telephone number for Robert Stanton as 800-624-7383. It's listed the same everywhere I look. Calling that number results in a recorded message ...   Mon Aug 7th, 2017 04:24 pm

Thanks! ...   Mon Jun 12th, 2017 12:04 pm

No Expert, but looks like Go-Kart to me. Not sure about the model. There were 600's and 800's. Don't know the difference. ...   Fri Apr 7th, 2017 11:15 am

THanks Jerry, There are definitely a lot of similarities. Is there anything on it to confirm, serial# maybe? Scott Sigafoos thought it might be a ...   Wed Apr 5th, 2017 02:26 am

Thanks Kevin! ...   Mon Apr 3rd, 2017 08:18 pm

seat bucket ...   Mon Apr 3rd, 2017 08:16 pm

4th pic ...   Mon Apr 3rd, 2017 08:15 pm

3rd pic ...   Mon Apr 3rd, 2017 08:14 pm

2nd pic ...   Mon Apr 3rd, 2017 08:13 pm

Need some help with an ID for this enduro. Has a fiberglass seat bucket, 1" axle. No markings that I can find. Sending a few ...   Mon Apr 3rd, 2017 08:11 pm