 |
| Posted: Wed May 30th, 2012 07:35 pm |
|
1st Post |
Jack Canaday
Member
|
I am ready to assemble my Clinton. One problem, no seals. This is a Model 500 0300, ball bearing PTO engine. If anyone has or knowes where to get, please let me know.
Thanks Jack
|
|
Back To Top
|
| Posted: Wed May 30th, 2012 07:57 pm |
|
2nd Post |
Ted Johnson
Member
|
Hi, Jack. Ron Cubel is cleaning up a '62 Fox dead axle with twin A-500's. He talked to Terry Sullivan about parts, and I suggest you do likewise.
Terry Sullivan
2120 Carrera Ct.
Cumming, GA 30041
678 617-0730
terryas@att.net
Would you and Al be willing to pit together with me and Charlie at TBO as we used to do before last year? I' m looking forward to seeing the two of you! Ted Johnson
|
|
Back To Top
|
| Posted: Fri Jun 1st, 2012 03:57 am |
|
3rd Post |
Terry Bentley
Member
|
Clinton
SKF Timken OEM
7414 254270 7254/257-1 All flywheel
8796 471646 2303 A-400 pto
N/A 470601 2337 A-490 pto
7965 20x47x7 402407 E-65 pto
The seal you need are for flywheel listed above and for the A-490 pto.
Flywheel seal is same for Mac 5 thru 91B/1 pto
SKF 7414
Timken 254270
The PTO for your motor should be same as A-490
Crank diameter is 0.781"
Block measures 1.250"
Timken 470601
SHould be able to pick these up online or anywhere that carries Timken.
|
|
Back To Top
|
| Posted: Fri Jun 1st, 2012 01:56 pm |
|
4th Post |
Jack Canaday
Member
|
Thanks Terry, I had found the flywheel side, but my old CR and National books did not show seal for PTO. I was about to bore case to 1.375 to use one I could find.
Jack
|
|
Back To Top
|
| Posted: Fri Jun 1st, 2012 04:03 pm |
|
5th Post |
Terry Sullivan
Member
|
Jack, I missed your call the other day.
Did you get the flywheel sorted out?
I have the PTO side seal if you need it.
Terry S.
|
|
Back To Top
|
| Posted: Fri Jun 1st, 2012 07:32 pm |
|
6th Post |
Steve Miller
Member
|
Terry .. clinton with bushing on both ends the pto seal ..is it 1.250 od and the closest thing i found was .750 id is it gonna be to tight .??? i call napa only number that matched was 254270 .?? what do i have wrong .. thanks ..
|
|
Back To Top
|
| Posted: Fri Jun 1st, 2012 10:43 pm |
|
7th Post |
Terry Sullivan
Member
|
Steve,
My seals carry the timken brand name. I get them from Baum Hydraulics, but they don't show the part numbers in their catalog anymore. You have to give them the dimensions?? You are correct on the flywheel side.
For the A490 or 500-0300-xxxx series:
PTO 470601 .781x1.250x.250
Flywheel 254270 .750x1.124x.187
t
|
|
Back To Top
|
| Posted: Sat Jun 2nd, 2012 03:47 am |
|
8th Post |
|
|
|
