Please register to gain full access of the forum.
When you register please use your given name.handles and fake names will be deleted. if you are deleted you can re-register with your real name.
Does Max-Torque make a clutch for a yamaha enduro application? I looked on there website under vintage and all I saw was sprinters with macs.
Restoring a 72 Hornet Lp 1 enduro and prefer to put a yammie on it instead of a mac.
Thanks!
were it mine, I'd put an axle clutch on it and forget about the engine clutch. That being said, check with Jim Donovan at Max-Torque or Terry Ives.
With a Max-Torque you will limit your stall speed to about 6000 rpm or so which would seem a bit low for a Yamaha. A buddy of mine used to set his Horstman disc clutch at about 10,200 for enduros with a Yamaha.
