|
Posted: Thu Mar 30th, 2017 08:21 pm |
|
1st Post |
Joe Drabicki
Blackhawk Kart Guru in Florida
|
S O L D !!! S O L D !!! S O L D !!!
BOTH ENGINES SOLD TODAY !!!
These were offered last year as a build one get one as payment deal. I just didn't have time to do a deal. Photos were posted on the site last year. Maybe you could find the link and go look at the old pics. I WILL POST PICS LATE TONIGHT.
PHOTO UPDATE: The original posted ad for these engines was not found on the old link to the site. I looked from page 1 through 12 and did not find it. I got to a page that was all white but it said something about an error and no more info is available. I will try to upload photos below...
Both engines need to be rebuilt. One has a badly scored cylinder, the other is fine. These have the blue and red shrouds, come with mounts, curved headers and the dual carbs for both engines. I WILL ADD MORE INFO AND DETAILS LATER. I am working right now and need to keep this short.
CARB INFO: all carbs are Tillotson HL264A, whatever that means. I am not a carb guy, not a Mac engine builder. I don't know if they are gas OR alky. DON'T ASK ME TO TAKE THEM APART to measure anything. I don't have the time. They are priced fairly for the lower cost carb.
$250 for either engine OR $450 for both engines.
SHIPPING $100 (both engines)OR $75 (one engine) for packing and shipping EAST of Mississippi River, $125 (both engines)OR $100 (one engine) WEST of Mississippi River.
If interested, give phone number and email address. I will call you at night. Thanks.
Joe DrabickiLast edited on Sun Apr 2nd, 2017 03:12 am by Joe Drabicki
|
Back To Top
|
Posted: Fri Mar 31st, 2017 06:39 am |
|
2nd Post |
Joe Drabicki
Blackhawk Kart Guru in Florida
|
MORE PIX COMING: I plan to snap some pix of both engines together so you can see everything that comes in this deal. I have very limited spare time, so I won't snap anymore pix until over the weekend.
PIX POSTED NOW: You may buy BOTH engines OR just buy ONE, the choice is yours. You are buying it "as is". I don't want anyone to accuse me of hiding anything about these engines. I don't know the history of them, other than one got blown in a race. I bought both engines as a box of parts in a deal with a kart. I have never used them myself. THE PIX SHOULD SHOW THE CONDITION AND ANSWER YOUR QUESTIONS.
DON'T ASK ME TO TAKE ANYTHING APART or measure this port or that. I don't have the time.
I understand, from talking with Steve OHara and a few other knowledgeable Mac engine builders, that some of you might want to know if the carbs are for alcohol OR gas. I don't remember which is more desired or more valuable, a gas or alky carb. Again, I WILL NOT TAKE THE CARBS APART and I won't measure any ports or put any money into these engines. I just want to sell them and get them gone.
I believe I have priced them on the low end of the spectrum for a 101 engine for whichever carb is the lower priced one, so don't bother trying to jew me down on the price. Take it or leave it. This is a no hassle sale.
|
Back To Top
|
Posted: Fri Mar 31st, 2017 06:57 am |
|
3rd Post |
Joe Drabicki
Blackhawk Kart Guru in Florida
|
PIX I HAVE AS OF NOW: There are about 52 pix of these TWO 101 engines, jumbled together. Some pix are repeats and it is of no value to show them all, so I will post only the most relavent pix. The pix show inside the cylinders of both, show the blown scarred cylinder, the good cylinder, the crank journals, outsides of both, etc. Again, more pix will be snapped and posted this weekend. I am losing sleep as I type this. It is almost 3 am as I type this...
If you want a pic of something particular, just ask. I will not take apart a carb to snap pix. Don't ask.
Here are some pix:
good engine with piston in the cylinderAttachment: Margay and Mac 101B 002.JPG (Downloaded 186 times) Last edited on Fri Mar 31st, 2017 07:37 am by Joe Drabicki
|
Back To Top
|
Posted: Fri Mar 31st, 2017 06:58 am |
|
4th Post |
Posted: Fri Mar 31st, 2017 07:00 am |
|
5th Post |
Posted: Fri Mar 31st, 2017 07:09 am |
|
6th Post |
Posted: Fri Mar 31st, 2017 07:11 am |
|
7th Post |
Posted: Fri Mar 31st, 2017 07:11 am |
|
8th Post |
Posted: Fri Mar 31st, 2017 07:12 am |
|
9th Post |
Posted: Fri Mar 31st, 2017 07:13 am |
|
10th Post |
Posted: Fri Mar 31st, 2017 07:14 am |
|
11th Post |
Posted: Fri Mar 31st, 2017 07:16 am |
|
12th Post |
Posted: Fri Mar 31st, 2017 07:27 am |
|
13th Post |
Joe Drabicki
Blackhawk Kart Guru in Florida
|
crank good engine...but you will want to replace all bearings and gaskets with new since these engines have been sitting in a box for who knows how long... Attachment: Margay and Mac 101B 007.JPG (Downloaded 180 times)
|
Back To Top
|
Posted: Fri Mar 31st, 2017 07:29 am |
|
14th Post |
Posted: Fri Mar 31st, 2017 07:31 am |
|
15th Post |
Posted: Fri Mar 31st, 2017 07:39 am |
|
16th Post |
Posted: Fri Mar 31st, 2017 07:39 am |
|
17th Post |
Posted: Fri Mar 31st, 2017 07:47 am |
|
18th Post |
Posted: Fri Mar 31st, 2017 07:48 am |
|
19th Post |
Joe Drabicki
Blackhawk Kart Guru in Florida
|
S O L D !!! S O L D !!! S O L D !!!
BOTH ENGINES SOLD TODAY !!!
|
Back To Top
|
|
|
|