| Author | Post |
|---|
Kelly West
|
Anyone have a copy of the hartman clucth set up specs that I could get a copy of. Thanks Kelly kwest@mchsi.com
|
Doug Tenney
|
Kelly,
Does your specific clutch have the Insta-Slipper arms, or can the shoes pivot freely? I have instructions for one but not the other.
Doug
|
Kelly West
|
I am looking for the one that does not include the slipper kit. Thanks.
|
Doug Tenney
|
Hi Kelly,
I think that the attached file might be what you're looking for.
Good luck. We're going through the same process with my son's Mc91. So far we're using two home-made 0.083" thick steel weights per shoe, along with L&T oil. Seems to work well, although I'll probably try a little more weight.
After replacing the O-ring and outer lip seal, the oil is actually staying inside the clutch where it belongs!
It seems to be unanimous among the Hartman experts: the Insta-Slipper kit is the way to go. We haven't found anyone willing to part with one.
Doug
Attachment: HartmanClutchInstruction1.pdf (Downloaded 46 times)
|
Doug Tenney
|
Re-sharing another Hartman clutch file that might be useful:
Attachment: HartmanClutch1029_closed_cover_explod.pdf (Downloaded 46 times)
|
Doug Tenney
|
...and another...
Attachment: HartmanClutch1030N_open_cover_explod.pdf (Downloaded 44 times)
|
Doug Tenney
|
...last one...
Attachment: HartmanClutchPartsList.pdf (Downloaded 39 times)
|
Kelly West
|
Thanks everyone. kelly
|
