Please register to gain full access of the forum.
When you register please use your given name.handles and fake names will be deleted. if you are deleted you can re-register with your real name.
Hey Dick,
What year Foxes did the pictured ones come from? My '59 and '62 Maks both came with rod ends that were more elongated. I'm wondering if Tourek changed their design (or Fox their spec).
Dan,
Interesting question. My original drawings of the 59 Mak-Kart assembly shows the version in my post. The parts list shows it as 200-017 and I have the original drawing that was revised in 1969 and it looks like the one I posted. However my 1967 literature shows an extended shank. I can't remember seeing any of the extended ones but that doesn't mean they were never made.
I still have the '62 Mak. The '59 is long gone...except for the rod ends. We changed the steering on the '59 back then to ackermann and ended up using heim type rod ends.
What do you need for the ball joints you still have, if you're willing to sell them? I reproduce stainless Fox pedals and throttle arms for the cross rod behind the tank if needed.
Tom,
Jack Murray had some of these and they will work but they have a groove machined in the shank, are too long and do not have a cotter hole. I suppose I could use a filler on the shank and then paint them. I have a fixture for cutting the ball stud and drilling the hole.