Please register to gain full access of the forum. When you register please use your given name.handles and fake names will be deleted. if you are deleted you can re-register with your real name. |
Moderated by: Kevin Gagne |
Author | Post | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Joe Drabicki Blackhawk Kart Guru in Florida
|
Used Hegar Sprocket hub, has two quick change spin on rings to keep a split sprocket on the hub. All the threads are good. This fits a one inch axle. This is one really cool hub. I don't have the tool to loosen/tighten the rings. The main problem is that there are only two little dowel pins to keep the sprocket from rotating. Someone could drill and tap in some more dowel pins. The two remaining pins are shown in the pics. I will not fix this. The buyer must do this or hire someone to do it. See the pics. $30 plus $15 shipping. Message me your contact info Attachment: 20200720_185527.jpg (Downloaded 81 times) |
|||||||||||
Joe Drabicki Blackhawk Kart Guru in Florida
|
2 Attachment: 20200720_185546.jpg (Downloaded 81 times) |
|||||||||||
Joe Drabicki Blackhawk Kart Guru in Florida
|
3 Attachment: 20200720_185558.jpg (Downloaded 81 times) |
|||||||||||
Joe Drabicki Blackhawk Kart Guru in Florida
|
other side Attachment: 20200720_185633.jpg (Downloaded 81 times) |
|||||||||||
Stan Thompson
|
JOE I HAVE THE WRENCHES FOR YOUR HUBS SORRY IF I STEPPED ON YOUR TOES JUST TRYING TO HELP , STAN |
|||||||||||
Joe Drabicki Blackhawk Kart Guru in Florida
|
Hello Stan! No toes stepped on. Good to hear from you. Maybe you want this hub to go with the wrenches. Trade me your Blackhawk Kart and you get this hub. Good trade, right? Kind Regards, Joe Last edited on Mon Jul 27th, 2020 10:18 pm by Joe Drabicki |
|||||||||||
Stan Thompson
|
JOE I WOULD NOT WANT TO TAKE ADVANTAGE OF YOU WE ARE TOO GOOD OF FRIENDS TAKE CARE LET ME KNOW WHEN YOU WANT ME TO SEND THE BLACKHAWK THANKS STAN |