 | PM |  | | Quote | | | Reply | | | Full Topic | |
| Joined: | Mon May 1st, 2017 |
| Location: | |
| Posts: | 6 |
| Status: |
Offline
|
| Mana: |  |
GEM G2165
S3 with welded on restrictor plate, 9 1/4- to 9 ¾ Flex, 10,600 max slip.
IR1
IR2
SLIPPY All are for 1 ¾” flex.
Two TSH Slippy’s.
Controlled--- 8 to 8 ½ flex, 10,500 to 10,800 slip.
Stock Appearing--- 8 ¾ to 9 ½ flex, 10,500 to 10,800 slip.
$75 plus shipping.
One VG-2 Slippy.
A very limited run (less than 10) of an IR1 Spec pipe with an added
Slippy cone with a 2” pull.
$75 plus shipping.
XR3
I know nothing about this pipe. Not even sure it’s XR3. It was a 100cc pipe
With a slotted outlet. Somebody drilled a round outlet holenear the slot to
Make it a 135cc pipe. I have a plate to cover the 2nd outlet if you want. Pipe
Looks like it’s been used a lot, it’s pretty beat up. I won’t sell this pipe. If you
Buy a different pipe you can have this for free. First one who wants it, gets it.
Mark J Schoonover (Milo’s dad)
MJS Racing
mjsracing@hotmail.com
262-370-6841 cell
Last edited on Sat Sep 2nd, 2017 04:06 am by Mark J Schoonover
| Close Window | |