View single post by Carl Haydt | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Sat Jul 1st, 2017 04:06 pm |
|
||||||||||||
Carl Haydt
|
Hi Ken, Yes and no,lol I did manage to install the front tie rods and rear axle & sprocket BUT after looking at the pic of the Red Devil you posted I realized that the ugly piece of flat stock with the holes in it that was crudely welded on the RR of the frame (that I removed) WAS the bracket for the swing mount! OOPS! So now I'm at a crossroads as to what to do. I can re-install that piece but I don't have the original swing mount & the swing mounts I have don't mount the same way OR I could just use the swing mount I have and fasten it with a bolt & rubber washers thru the frame. I also think I'm going to copy the diamond pattern on the seat in your pic,I kinda like that Carl
|
||||||||||||
|