View single post by Lance Mearing
 Posted: Mon Apr 10th, 2017 07:54 am
PMQuoteReplyFull Topic
Lance Mearing

 

Joined: Sun Apr 2nd, 2017
Location:  
Posts: 4
Status: 
Offline
Mana: 
 were it mine, I'd put an axle clutch on it and forget about the engine clutch. That being said, check with Jim Donovan at Max-Torque or Terry Ives.
With a Max-Torque you will limit your stall speed to about 6000 rpm or so which would seem a bit low for a Yamaha. A buddy of mine used to set his Horstman disc clutch at about 10,200 for enduros with a Yamaha.
Close Window